Latest Saudi Aramco Work Permit Receiver Online Exam

Table of Contents

Welcome to your Saudi Aramco & Sabic Work Permit Receiver Question Answers

let's get start

1. 

Where are work permits required?

All restricted areas.

All fenced areas.

All assembly points.

All Saudi Aramco areas.

None

2. 

What are the basic safety measures to protect the driver from fall when driving near the excavation?

Barricade/blinker light.

Standby man/barricade.

Barricade/signage.

Signage/standby man

None

3. 

Common Hazard in Saudi Aramco are slip, trips and falls, that are caused by:

Uneven Floor Surfaces and and Changes in Level.

Floors with flat surfaces

Dry Floors and well-arranged cables

Good Housekeeping

None

4. 

When can an electrician use a welder’s work permit?

When they work on the same equipment at different times.

If both the issuer and receiver agree and state so on the permit form.

Never

When the foreman gives his permission.

None

5. 

Hydrogen Sulfide (H2S) may react and explode when in contact with this Acid;

Nitric Acid

Muriatic Acid

Hydrochloric Acid

Citric Acid

None

6. 

Testing of H2S requires SCBA?

True

False

None

7. 

Orientation is part of the important aspects of Emergency Preparedness in Saudi Aramco that includes;

Correct actions on hearing alarms

Accessing the restricted offices

Wearing your preferred dress

Knowing the location of the mess hall/tea room

None

8. 

In Saudi Aramco, the maximum safe angle of the slope for type C soil is?

34 (Type C)

None of above

54 (Type A)

45 (Type B)

None

9. 

What is a safety hazard?

Electrical.

Mechanical.

All of above.

Gravity.

None

10. 

Who may approve critical lift plans?

Rigger II

Rigger III

Division Head

Rigger I

None

11. 

The confined Space Entry permit requires that:

The confined space is properly isolated.

Non-sparking tools be used.

Only hot work can be done.

Only cold work can be performed.

None

12. 

What are the primary hazards for excavations and trenching?

Slip, trips and fall

Toxic gases

Oxygen enriched/deficient

Collapse and cave in

None

13. 

What is NORM?

Neutrally Occurring Radioactive material.

None of above.

Naturally Occurring Radioactive material.

Normally Occurring Radioactive material.

None

14. 

In what situation must lock and tag be installed?

All types of jobs.

Before issuing work permit.

When instructed by the issuer.

When the energy can cause injury.

None

15. 

Respiratory protection equipment authorized to be used in Saudi Aramco are;

STBA/SCBA.

STBA/SABA.

SABA/SCBC

SCBA/SABA

None

16. 

How to renew a work permit?

The permit receiver sign for renewal

The supervisor signed it

The permit issuer sign for renewal

The issuer and receiver coming on shift sign for renewal

None

17. 

ho is the part of Joint Site inspection?

Work Permit Receiver.

None of above.

Both.

Work Permit Issuer.

None

18. 

What are ‘hold tags’ used for?

To isolate electrical circuit breakers.

To replace padlocks and lockout devices.

For hot work.

To explain reasons for locking out equipment.

None

19. 

The purpose of hazard recognition is to __________hazards before they can cause an incident.

Eliminate

Minimize

Control

Identify

None

20. 

The receiver’s copy of the work permit which is currently in use should be:

Posted in the control room.

Kept with the Maintenance or Construction foreman.

Kept at the Maintenance or Construction office.

Posted or readily available at the job site.

None

21. 

What must be done when personnel working in the equipment could be injured by residual energy in the equipment?

Isolate and apply lock and tag.

Let him use PPE.

Issue work permit.

Do not allow work.

None

22. 

A work permit may be extended for one (1) additional operation shift, if:

Only cold work is being done.

All hot work has been completed.

The new on-coming issuer and receiver agree on conditions and sign the permit to extend it.

The work is almost complete.

None

23. 

The duration for renewal of work permit is __.

One shift.

Three shifts.

No renewal of permit.

Two shifts.

None

24. 

Ladders should extend at least _ ft. above the landing area?

3

5

2

4

None

25. 

Filing of work permit

Work permit should be kept in two months.

Work permit should be kept in four months.

Work permit should be kept in three months.

Work permit should be kept in one month.

None

26. 

What information the work permit issuer explain to the receiver before issuing EOLB permit?

Responsible persons

Hazard of permitting.

Hazards of the chemical

Duration of work permit

None

27. 

Why must the work permit issuer check the crane operator certificate before he issue work permit

To make sure he own the equipment

To identify his company

To check the equipment

To prove he is competent

None

28. 

A ____________is anything that can have an adverse impact on your safety.

Both health & safety Hazards

Safety Hazard

None of above

Health Hazard

None

29. 

Eliminate and Isolation are?

Engineering control

Administrative control

PPE

All of above

None

30. 

Toxic and flammable gases could be found in:

Excavations.

Lakes or rivers.

Elevators.

Office buildings.

None

31. 

In what order should hydrocarbon process equipment be prepared before welding the equipment?

Gas test, isolate, drain content

Clean, drain, gas test

Isolate the equipment.

Isolate, drain, purge, gas test.

None

32. 

How is hot work permit different from cold work permit?

Hot work is red.

Hot work identify potential source of ignition.

Hot wok identify fuel source.

Hot work identify the permit issuer.

None

33. 

If the receiver must leave the job site, the work permit can be left with:

The receiver is not allowed to leave the job site under any circumstances.

Anyone who can read the work permit.

Anyone, as long as the permits remain on the job site.

A senior crew member who understands the job and the conditions stated on the work permit.

None

34. 

The scaffold inspector must sign the tags for all scaffolds above 6m?

False

True

None

35. 

This _________system is mandatory when responding to H2S emergencies or working in hazardous areas;

GFCI.

Buddy.

LOTO.

Sewage.

None

36. 

What are warning signs use for?

Identify restricted activities.

Identify hazard.

Identify restricted areas

Decoration.

None

37. 

Who is jointly responsible for the safety of people and equipment at the work site?

The receiver and other workers at the job site.

The issuer, receiver, gas tester and Loss Prevention representative

Operations and maintenance engineer.

The issuer and receiver.

None

38. 

Scaffold should not be erected near the excavation; it should be at least _ times the depth of the trench.

1.2 times

None of above

1.5 times

2 times

None

39. 

What should be the first step in controlling the hazards on the workplace?

Isolate

Reduce

Eliminate

Wear PPEs

None

40. 

When to stop and cancel a work permit?

If the receiver leave the site.

Is the hazard is not in the work permit.

If the work has no barricade.

If the work has no signage.

None

41. 

Any work that develops heat or provides an ignition source in a restricted area requires what type of work permit?

Release Permit.

Cold Work.

Hot Work.

Confined Space Entry.

None

42. 

Wind direction must be considered when a permit is issued because:

Because work must always take place downwind of the release.

Items may be blown to the site making the work area untidy.

Dust particles may be blown into opened lines or vessels.

Flammable gases may be blown towards an ignition source.

None

43. 

When working in noisy area what issuer will suggest.

Goggle.

Earmuff.

Gloves.

None

44. 

Which of the following is not the example if unsafe act?

Damaged/defective/incorrect equipment.

Operating equipment without proper training or certification.

Using defective equipment.

Improper use of equipment.

None

45. 

Heavy equipment operations are the most common cause of work related fatalities in Saudi Aramco.

False

True

None

46. 

Which of the following answers best describes a Work Permit Receiver?

Craftsmen, or others, who have been certified to receive work permits.

Only Saudi Aramco supervisors.

Any maintenance or construction supervisor.

All electrician, but not all welders.

None

47. 

When must receiver stop the work?

Nobody can stop work.

During walkthrough.

During inspection.

If stated in the duration box.

None

48. 

Restricted in Saudi Aramco are:

Oil and gas plant/loading pier/office.

Marine vessel/sewage treatment/plant/sump.

Air fueling operation/bulk plant/store room.

Tank farm/plant pump station/warehouse.

None

49. 

A ______________is a work permit process that helps identify, control, eliminate or minimize any hazards before work can begin, and then ensure that the area is safe when the work is complete.

Job Safety Analysis (JSA)

Work Permit system

Joint Site Inspection

Hazard Analysis Checklist

None

50. 

A _________should be used for the erection of scaffolding.

Confined Space Entry Work permit.

Cold Work permit.

Hot Work permit.

Release of Hazardous Liquids or Gases Work permit

None

Ace the Latest Saudi Aramco Work Permit Receiver Online Exam! Prepare with our comprehensive guide. Get tips, practice questions, and everything you need to become a certified WPR and ensure safety at work. Increase your chances of successtoday! In Saudi Aramco’s bustling world, safety is a top priority. To ensure that each job is carried out safely, Saudi Aramco has implemented a meticulous Work Permit System.

What is a Work Permit?

A Work Permit is a critical document that authorizes specific construction, maintenance, or repair work. It identifies potential hazards associated with the job and outlines necessary precautions. The permit also details who is responsible for ensuring safety measures are followed.

Key Responsibilities of a WPR

• Participating in the Joint Site Inspection with the issuer to assess the work area for potential hazards.
• Ensuring all personnel working under the permit are aware of the hazards and precautions.
• Understanding the permit renewal process and obtaining necessary approvals for extension.
• Following safe work practices and stopping work if the permit is violated or unsafe conditions exist.

Benefits of the Work Permit System

• Reduces workplace accidents and injuries by identifying and mitigating hazards before work begins.
• Improves communication and coordination between work permit issuers and receivers.
• Ensures everyone involved in the work understands the safety protocols needed for a safe job completion.

Who is a Saudi Aramco Work Permit Receiver (WPR)?

A Work Permit Receiver (WPR) is a certified professional responsible for receiving and implementing the work permits.

Training and Certification

To become a WPR, individuals must undergo rigorous training and certification. This training equips them with the knowledge and skills to effectively manage work permits and ensure workplace safety.

(WPR) FAQs

Q: What is a Work Permit?

A: A Work Permit is a document authorizing specific work and outlining safety precautions needed for the job.

Q: Who is a WPR?

A: A WPR is a certified worker who receives work permits, verifies safety measures, and ensures safe work execution.

Q: What are a WPR’s key responsibilities?

A:Reviewing permits and understanding hazards.

Verifying safety measures like PPE.

Monitoring worksite safety during the job.

Participating in joint site inspections.

Q: What are the benefits of the Work Permit System?

A: Reduces workplace accidents.

Improves communication between issuer and receiver.

Ensures everyone understands safety protocols.

Conclusion

The Work Permit System is a cornerstone of safety at Saudi Aramco. By understanding the role of WPRs and their crucial responsibilities, everyone can contribute to a safe and healthy work environment.

Remember, safety starts with you. Follow all safety protocols and report any unsafe conditions immediately. Your vigilance can make all the difference in maintaining a safe work environment.