Saudi Aramco Work Permit Exam 2024

Introduction

Securing a role at Saudi Aramco is a coveted achievement, and the process often involves a critical step—the Saudi Aramco Work Permit Receiver Exam. This article delves into the details of this exam, shedding light on its significance and offering insights into what aspiring candidates need to know.

Welcome to your Saudi Aramco Work Permit Receiver Exam

 

1. 

Why must equipment be de-energized and depressurized before work is started?

Accidental start-up could happen

Purge gas can be lost

Gas tests are not accurate

Locks and tags will deteriorate

None

2. 

Where must the receiver keep work permit after it is issued?

With senior crew member

In the control room

Display at the job site or in his possession

Within the 75 meter of the work permit

None

3. 

What training should a fire watch have?

Operate fire equipment

Operate radio equipment

Operate heavy equipment

Operate control room

None

4. 

The information’s entered in the “exact work location” box is important Because it controls?

Where the receiver can work

How long the receiver can work

What equipment the receiver can use

How many workers can be at the job site

None

5. 

The use of a vehicle in an operating area requires, which work permit?

Hot

Release

Cold

Entry

None

6. 

What is oxygen deficiency?

Higher than normal amount of oxygen

A lower than normal amount of oxygen

Oxygen that above it’s flash point

Less than 23.5% oxygen

None

7. 

who is responsible for safety at the work site after a permit has been extended?

The person who countersigned the permit.

The issuer and receiver who signed the extension.

The original issuer and receiver.

The one who originally did the joint site inspection.

None

8. 

Work permit authorize ………..

General work at specific plant

General equipment at all work site

Specific work at specific location

Specific tools at general location

None

9. 

The safety of work site is a sole responsibility of an issuer?

False

True

None

10. 

The receiver can leave the job site any time as long as he gets the Permeation from his supervisor.

True

False

None

11. 

What are the basic precautions for cold work? Select all items that apply.

Gas test

Special work precautions

Standby man

Fire watch

PPE & Barricade and warning signs

None

12. 

What responsibility do issuers and receivers share when signing a work permit?

Maintaining safety conditions at the site

Getting countersignatures from superintendent

Responding to emergency events

Monitoring the operation of process

None

13. 

Who must sign the work permit to close it?

Designated representative

Competent person

Issuer and receiver

Gas tester, issuer and receiver

None

14. 

Who should keep the work permit?

The standby man

The issuer

The receiver

The fire watch

None

15. 

Who install locks and tags first?

Operations

Power distribution

electrical engineer

Sceco

None

16. 

(1) The issuer must stop work if ————-? (2) A pipe fitter can not work on the same pieces of equipment using welder’s permit because.

Each type of work involves different hazards.

Welders are usually contractors.

Gas tests are not needed for pipefitters.

Joint site inspections are not needed for pipefitters.

None

17. 

What hazard would you find when doing hot work?

Ignition source

Ignition switch

Ignition point

Auto ignition temperature

None

18. 

What must the issuer write on the work permit?

Gas test results, name and badge number

Badge number and certificate expiry date.

Name, badge number, and certificate expiry date

Name, organization code and badge number

None

19. 

Who is a work permit receiver?

A person certified to receive permits

A person nominated by his supervisor

A maintenance or contract worker

A qualified Saudi Aramco employee

None

20. 

Who must sign a work permit to extend it?

Superintendent’s countersignature is required

The new area foreman and the new issuer

The new issuer, receiver, and gas tester

The new issuer and receiver

None

21. 

The issuer must try to start –up equipment at the field switch after it has been isolated and before work starts to make sure:

Locks and tags are installed

It can not accidently start

There is no tag in the area

The receiver’s tag is installed

None

22. 

work permit can be issued for up to 30 days if_______________

It is highly unlikely that conditions will change

The work site is far away

Only cold work will be done

The receiver can not close the work permit

None

23. 

What is the purpose of the work permit system?

To document where receiver start work for time keeping.

To authorize specific construction or maintenance work.

what do you call an area where work permits are required?

To insure that the hot work is not done in restricted area.

None

24. 

what type of work does the work permit system authorize?

Specific construction, maintenance, or repair work

All work done by maintenance or contractors

All work constructed for Saudi Aramco

Non- hazardous work where safety is important

None

25. 

Who is responsible for the safety on the work site?

Both issuer and receiver

Both fire watch and the standby man

The receiver

The issuer

None

26. 

Who should ask for work permit before they start working?

The standby man

The fire watch

The issuer

The receiver

None

27. 

if a work permit is not issued during an emergency, what must be done to do the work?

Joint site inspection.

Superintendent must approve.

All safety precautions must be taken.

Wear Scott air Pak.

None

28. 

We use work permits in hazardous areas to identify——–

The designated representative

Alternated representative

Hazards and precautions

Expired permit

None

29. 

“use a fire blanket” or “hand dig only” are example of what?

Regular precaution

Additional precaution

Hazards

precautionary hazards

None

30. 

What considered cold work?

Abrasive blasting and painting

Sand removal and scaffold building

Scaffold building and grinding

Brush painting and abrasive blasting

None

31. 

Which work permit requires sewer to be covered within 75 feet?

Entry

Cold

Release

Hot

None

32. 

The receiver must stop work if_____________.

The work site becomes un safe.

the designated representative must leave

He can not find the issuer.

The issuer leaves the job site

None

33. 

What must the receiver do if he stops work?

Tell the issuer

Tell the designated representative

Tell the senior crafts man

Tell his immediate supervisor

None

34. 

What are the basic precautions for confined space entry, select all items that apply.

Install air mover

A sign a standby man

All of Above

Take gas tests

Install lighting

Isolate, clean, and purge equipment

None

35. 

What are the basic precautions for hot work permit? Select all items that apply?

Gas test

All of the Above

Cover sewer drains

Fire protection equipment

Blind, isolate, clean, and purge equipment

Fire watch

None

36. 

What must the issuer do if a joint site inspection is not done?

Required barricades and warning sign

Tell his foreman

A sign a designated representative

Write why not on the work permit

None

37. 

A release of hazardous liquids or gases permit is required when?

Crafts man builds a scaffold

Pipefitters open a line or install blinds

Operators release hydrocarbons to the flare

Operations drain equipment

None

38. 

Why is the check list section important to issuer and receiver?

It controls the receiver’s break time.

It defines the duration and scope of work.

It tells them all precautions to take.

It makes sure important steps have been taken.

None

39. 

Who decides whether an area should be restricted or not?

The receiver

The issuer

The department manager

The superintendent

None

40. 

What considered cold work?

Sand removal and scaffold building

Scaffold building and grinding

Brush painting and abrasive blasting

Abrasive blasting and painting

None

41. 

Restricted areas include which locations?

Gas plants, tank farms, and assembly areas

Pump stations, tank farms, and gas well

Welding shops pump stations, and assembly area

Dining halls, housing units, and operating area

None

42. 

What information must the gas tester enter on the work permit?

Gas test results and normal level

Badge and certificate number

LTX-310 expiry date, name and badge number

Gas test results, name and badge number

None

43. 

What happens if work must continue past the time the original permit was to expire?

Keep working, but tell the issuer.

Stop work and come back the next day.

Extend the permit or issue a new one.

Work can continue until the job is completed.

None

44. 

Who should point out all hazards and write on the work permit?

The issuer

The fire watch

The receiver

The standby man

None

45. 

Any worker can be a sign as standby man?

False

True

None

46. 

Which of the following is NOT a restricted area?

Loading pier.

Gasoline station.

Dump site.

Tank farm.

None

47. 

Who can decided that work is a low risk and that a work permit is not needed?

The receiver

The department manager

The issuer

The superintendent

None

48. 

what do you call an area where work permits are required?

Controlled area.

Restricted area.

Dangerous area.

Sensitive area.

None

49. 

What should be a assigned when working near combustible materials?

Fire men

Flag man

Standby man

Fire watch

None

50. 

What is the acceptable level of LEL to allow hot work

5% to 50%

0.0 PPM

10 to 100 PPM

21% 23.5%

None

51. 

Where could an issuer find out which permit to issue for a special job?

Facility operating instructions

Corporate loss prevention manual

On the front of any work permit

On the back of any work permit

None

Time's up

Time is Up!

2nd WPR Exam

Importance of the Saudi Aramco Work Permit Exam

The Saudi Aramco Work Permit Exam is essential as it is a key determinant for individuals seeking employment within the prestigious organization. The exam assesses crucial skills and knowledge relevant to the responsibilities of a Work Permit Receiver, ensuring that candidates meet the high standards set by Saudi Aramco.

Eligibility Criteria

Before diving into the exam specifics, it’s essential to understand the eligibility criteria. Candidates must meet specific educational and experience requirements to be eligible to take the exam. This section outlines these criteria, providing clarity for potential applicants.

Exam Structure and Format

Navigating the exam structure is vital for success. This section breaks down the format of the Saudi Aramco Work Permit Receiver Exam, detailing the types of questions, time constraints, and scoring methodology. A clear understanding of the exam’s blueprint prepares candidates for what lies ahead.

Preparation Tips

Success in the exam requires thorough preparation. From recommended study materials to effective study strategies, this section offers practical tips to help candidates maximize their preparation efforts and confidently approach the exam.

Training Resources

For those looking for additional support, various training resources are available. This section highlights recommended courses, study guides, and other materials that can enhance a candidate’s preparation and increase the likelihood of success.

Common Challenges Faced

Navigating challenges is part of the journey. This section addresses common obstacles candidates face and provides strategies to overcome them, ensuring that aspirants are well-equipped to tackle any hurdles that may arise during their exam preparation.

Success Stories

Drawing inspiration from those who have succeeded is motivating. This section features success stories of individuals who have triumphed over the Saudi Aramco Work Permit Receiver Exam, offering encouragement and insights into their journeys.

Benefits of Passing the Exam

Beyond securing a position at Saudi Aramco, passing the exam has additional benefits. This section explores the advantages of completing the Work Permit Receiver Exam, both professionally and personally.

Career Opportunities

With the exam cleared, a world of career opportunities awaits. This section outlines the various career paths available to those who pass the exam, providing a comprehensive view of the potential roles and responsibilities within Saudi Aramco.

How to Register for the Exam

Practical guidance on the registration process is crucial. This section walks through the steps to register for the Saudi Aramco Work Permit Receive Test, ensuring that candidates have a seamless experience from application to examination day.

Exam Day Guidelines

Knowing what to expect on exam day is essential for a smooth experience. This section offers guidelines and tips for the exam day, helping candidates manage stress and perform at their best.

Frequently Asked Questions (FAQs)

Q1: Can I retake the Saudi Aramco Work Permit Receiver Exam if I don’t pass on my first attempt?

A1: Yes, candidates are allowed to retake the exam. Details on reattempting are provided in the official guidelines.

Q2: Are there specific study materials recommended for the exam?

A2: Yes, the article covers recommended study materials and resources to aid your preparation.

Q3: What happens if I don’t meet the eligibility criteria?

A3: Candidates who need to meet the eligibility criteria must address the gaps before applying.

Q4: How long is the validity of the exam results?

A4: The validity period varies; details are available in the official exam documentation.

Q5: Are there any exemptions for specific candidates from taking the exam?

A5: Exemptions may apply in specific cases, and candidates can find details in the eligibility criteria section.

Conclusion

In conclusion, the Saudi Aramco Work Permit Receiver Test is a significant step toward a rewarding career at one of the world’s leading energy companies. Thorough preparation, understanding the exam structure, and leveraging available resources are crucial to success. Embark on this journey with determination and unlock the doors to a fulfilling career at Saudi Aramco.